Duinotech UNO r3 Main Board with Wi-Fi
- CAT.NO: XC4411
Bulk Pricing
Qty 1 - 2
$49.95 / Unit
Qty 3 - 5
$44.95 / Unit
Qty 6 +
$39.95 / Unit
Store
Uses a Micro-B USB lead such as WC7723 for connecting to the computer and uploading sketches. For full instructions please refer to the manual available on the downloads tab.
Please note:
• To talk to board you need to download and install CH340 Driver (search for driver on the net).
• You must upload code to both processors then configure the switches for them to talk to each other.
USB Port Types
USB Micro Type B
Number of USB ports
1.0 ports
Supported Wi-Fi Modes
802.11n (Wi-Fi 4),802.11g (Wi-Fi 3),802.11b (Wi-Fi 1)
Transmission frequency
2.4 GHz
Transmission power
10.0 mW
Transmission range
100.0 m
Receiver Antenna Style
Internal Antenna
Transmitter Antenna Style
Internal Antenna
Microcontroller
ATMega328 + ESP8266
Length
65.0 mm
Width
50.0 mm
Height
15.0 mm
Weight
25.0 g
Packaged Dimensions
9.9cm(Length) x 9.9cm(Width) x 1.7cm(Height)
30 August 2023
The mod(ule) squad
These top 5 input/output devices for Arduino will get your creative juices flowing.
Read more
about The mod(ule) squad