NOTE: This product has been replaced by TL4479. Click here for the replacement
250g roll of 1.75mm copper coloured PLA filament to suit 3D printers, including the TL4582 3D Pen Kit.
PLA (Polylactic acid) is a biodegradable, environmentally friendly plastic with a shiny, glossy appearance. It doesn't have the notable smell of hot plastic, compared to ABS during the printing process.
Can provide sharper detail compared to ABS, doesn't necessarily need a heat bed but benefits from cooling during the printing process.
Printing Settings
• Best Printing Temperature: 190-240°c (220°c recommended)
• Bed Temperature: 0-60°c (50°c recommended)
• Printing Speed: 30 - 90mm/s
