THIS OFFER IS FOR ONLINE ORDERS TO AUSTRALIAN ADDRESSES ONLY. LIMITED QUANTITY. WHILE STOCK LASTS.
Powered by OSRAM Oslon LEDs and designed to fit a common 90mm cutout, this Ecolume kit provides a convenient replacement solution for the most common downlight sold in Australia.
This LED downlight comes with a satin chrome gimbal housing.
Features:
• Up to approx. 50,000 hours of life, depending on use
• Lumens: 894
• Colour Temp.: Cool White
• Beam angle: 50°
17W Dimmable LED Driver Included
Using high quality electronics, this dimmable LED driver has been carefully designed to offer the most affordable and smoothest dimming performance on the market. Designed by Soanar, it boasts a very user friendly design for quick connection and maintenance.
AC input 240VAC ± 10%
Works with leading edge and trailing edge TRIAC dimmers
Clipsal trailing edge dimmer recommended
Built-in power factor correction; PF>0.9
Input, output and short circuit protection
Constant current design
Class II power unit, no FG
Suitable for indoor LED lighting applications
100% full load burn in test
Cooling by free air convection
Note: The LED driver pictured on the side of the product box is the non-dimmable version of this driver. All units have been checked to confirm they are upgraded and include the newer dimmable LED driver.
Also Available:
Cat No. Housing Colour Temp. Lumens Beam Angle
JZ0800 White, Recessed Warm White 730 60°
JZ0802 White, Recessed Natural White 730 60°
JZ0804 White, Recessed Cool White 923 60°
JZ0806 White, Gimbal Warm White 706 50°
JZ0808 White, Gimbal Natural White 706 50°
JZ0810 White, Gimbal Cool White 894 50°
JZ0812 Satin Chrome, Gimbal Warm White 706 50°
JZ0814 Satin Chrome, Gimbal Natural White 706 50°
JZ0816 Satin Chrome, Gimbal Cool White 894 50°
LED vs. Halogen
LUMINOUS EFFICACY:
LEDs produce more light per watt than halogens
ON/OFF TIME AND CYCLING:
LEDs light up very quickly, reach full brightness almost instantly, and are not subject to extended delays in cold locations. Unlike fluorescent lamps which burn out more quickly when cycled or HID lamps that require a long time before restarting, they are also able to handle frequent on/off cycles with no loss of performance. This makes them ideal for use in applications that are subject to frequent on-off switching such a sensor activated areas or thoroughfares.
DIMMING:
LEDs can be dimmed, very easily.
COOL LIGHT:
LEDs emit no ultraviolet radiation or heat into the illuminated area that can cause damage to sensitive objects or fabrics.
LIFETIME:
LEDs can have a relatively long life. Fluorescent tubes are typically rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and halogen lamps at 2,000 to 4,000 hours.
SHOCK RESISTANCE:
LEDs, being solid state components, are difficult to damage with external shock, unlike fluorescent and halogen bulbs which are fragile.
GO GREEN:
LEDs do not contain mercury and other rare earth elements.
