Digital Flowmeter - Hall Type 1.5 - 25 l/Minute

CAT.NO: ZD1200

Discontinued

$1.24$29.95

Save $28.71

Store

Choose a store for stock availability

Digital Flowmeter - Hall Type 1.5 - 25 l/Minute

$1.24

Overview

With 1/2 BSP connections and 0 - 80°C temperature range, this unit could be used in hot water, although we recommend operation in temperatures no higher than 45°C. It draws between 3 and 6mA over a supply range of 2.4 to 26VDC, making it ideal to be powered from a 12 volt battery if mains supply is not available. Simple DC output pulses in proportion to supply voltage and fluid flow make interfacing easy. The impeller is made from acetal and the shaft is stainless steel, so it will work with low viscosity fluids - we don't have any information available regarding its suitability for other fluids. Data sheet supplied with each unit or on the website.

Specifications
• Supply voltage : 2.4 - 26VDC
• Supply current :Typical 3mA, maximum 6mA.
• Output mode: Open collector
• Output rise time: Typical 1second (max 10 seconds)
• Output falling time: Typical 0. 3 seconds. (maximum 1.5 second)
• Flow rate range: 1.5 - 25 L/min.
• Maximum working pressure: 1MPa
• Fluid temperature: 0 ~ 80°C
• Environment temperature: -20 ~ 80°
• Dimensions: 70(L) x 31(W) x 31(H)mm